nsr 250 Vs rvf 400???
-
hey guys ridin these two bikes out there....just wan to ask between these two bikes...which is better in performance? maintaince?
1.RVF ful tank how much? can lasts for how many clicks?
2.RVF usin how many spark plugs? how many bottles of engine oil?
3.which 1 is more expensive? pgm or rVf?
4.if u ridin rvf y do u choose rvf at first? the pros of ridin this bike?
5.about nsr250 izt true that now hard to find 1 in gd condition?
thanks in advance...for replying me...
-
Hmm I used to ride a RVF... i loved that bike.. but sold it as i was going abroad. Anyway, compared to PGM 4 ... pick up for first 2 gears might lose a bike's length.. but end of 3rd onwards... top speed still RVF wins... talking about unmodified....
Why i chose RVF.. cause i loved RVF... 4 stroke... well.. 4T oil uses more.. but hey.. i save on 2T mah... cornering handling is sperb and stable... full tank... can go about 280 km i think.. if i remember correctly... costs around 17-18 dollars i think... hope this helps..
-
Nowadays very difficult to get a good condition pgm4 liao. The difference is RVF 4 stroke and PGM4 2 stroke. If compare speed, PGM4 will only lose a bit although it's a 250cc bike. But maintaince very siong, u still need to buy 2t for it. RVF quieter, using 4 spark plugs but of course more expensive lah. Mi juz went to find out for FS plate RVF cost around 12k.Originally posted by hoNda_cAstRoL:hey guys ridin these two bikes out there....just wan to ask between these two bikes...which is better in performance? maintaince?
1.RVF ful tank how much? can lasts for how many clicks?
2.RVF usin how many spark plugs? how many bottles of engine oil?
3.which 1 is more expensive? pgm or rVf?
4.if u ridin rvf y do u choose rvf at first? the pros of ridin this bike?
5.about nsr250 izt true that now hard to find 1 in gd condition?
thanks in advance...for replying me... -
adrian u haven buy bike ah?? so got check out the price of pgm4??Originally posted by Nsr150:Nowadays very difficult to get a good condition pgm4 liao. The difference is RVF 4 stroke and PGM4 2 stroke. If compare speed, PGM4 will only lose a bit although it's a 250cc bike. But maintaince very siong, u still need to buy 2t for it. RVF quieter, using 4 spark plugs but of course more expensive lah. Mi juz went to find out for FS plate RVF cost around 12k. 
fs plate rvf? which motorshop? 
-
if u are those those type of owner hu have a lot of spare cash to rebuild ur bike and some spare to mod the best u can get is the PGM the kick 2 stroke gif u and 4strokers is diff
for the rvf is more friendly As u jus onil need to take care of engine oil n spark plugs
another words got $$$$ to mod and play get the pgm4 for the performance
for maintaince free purpose get the rvf as it id oso a good bike -
hmmm pgm got gd condition 1 ler... both oso nice lor but pgm better... i prefer dat lor but i oso like rvf... =PppPPOriginally posted by hoNda_cAstRoL:hey guys ridin these two bikes out there....just wan to ask between these two bikes...which is better in performance? maintaince?
1.RVF ful tank how much? can lasts for how many clicks?
2.RVF usin how many spark plugs? how many bottles of engine oil?
3.which 1 is more expensive? pgm or rVf?
4.if u ridin rvf y do u choose rvf at first? the pros of ridin this bike?
5.about nsr250 izt true that now hard to find 1 in gd condition?
thanks in advance...for replying me... -
dun buy pgm lah, lousy bike.
drink petrol fast, lim 2t faster, top speed only 180kmh.
pgm no good, dun buy >_< -
kns... tot u oso ride pgm ?? y u regret sibo?? but still i support pgm~Originally posted by nismoS132:dun buy pgm lah, lousy bike.
drink petrol fast, lim 2t faster, top speed only 180kmh.
pgm no good, dun buy >_<
but u shld knw mah the maintence 4 pgm is quite $$$ 1 mah... -_-" -
swee!! dun like rite?Originally posted by nismoS132:dun buy pgm lah, lousy bike.
drink petrol fast, lim 2t faster, top speed only 180kmh.
pgm no good, dun buy >_<
gif me lah~
-
haha...give me i oso dun mind...pgm leh...how many pple hav the chance to ride this bike during their life...Originally posted by milkshake:swee!! dun like rite?
gif me lah~ -
buy 2a bike....jio mi.......
-
start with the pros 1st lah, easiest.
fast.
chio.
ok finish
now the details.
2t lasts on average 1-1.2k depending on usage. if u like me, then it's about ±800km.
4T lasts around 5k, or around 5 months.
2 spark plugs.
shell fusion (95) will last you around 210km (or 180 if u're me). with reserve your total mileage can reach around 250-260km. i've managed over 40km purely on reserve alone.
i usually pump RM21, the highest i've ever reached is RM22.50. on average, 15-16 litres of petrol. in singapore the higest i ever pumped is $17.
power below 6k RPM is smooth, no vibrator like qualities.
power above 6k is good.
power above 8k is fun.
power at 10.5k is what you need.
parts are NOT cheap. every single part is made and flown in from japan, common parts (like piston etc) can be found at FJT and eversuccess near mustafa for really cheap prices.
but they're still cheaper than other *ahem*apuila*ahem* brands
tyres are 110 front, 150 rear.
air is 28F, 30R.
STOCK top is ±180kmh (please don't think your SP/KRR/TZM is faster, before you reach 200km, i'm long gone, and remember, your 200, is my 170-80.)
mods are plentiful. please don't make me list them all.
this is not a bike you can just dump at 1 side and not bother to take care of. if you don't take care of your bike, it will not take care of you.
just remember this.
at the race last sunday at pasir gudang, a pgm3 came in 3rd. out of 16 bikes, 15 of them had 1000cc engines. so there goes the notion that this bike is equal to a KRR *pui*
_________________
so pgm still so good so got $$ shld buy pgm -
wah seh... so fierce....Originally posted by HoN:buy 2a bike....jio mi.......
ppl haven't buy bike ask them to jio u liaozz -
dun buy.... lousy....
buy rs250... better... best in the WWW!!! -
erm i tot now is nsr250 and rvf y drag ahem ah pui la ahem inside again henry
??????????????????????????????????????
i knw rs250 is high power oso dun like tt drag inside leh
but is out of the topic leh
???????????? -
alamak if pgm maintence too $$$ den go jb pump petrol & buy 2t lor... tot u v gd at it one mah
-
simi si pgm, i only know ec80, i dunno pgm ^^
-
simi? den i tin trishaw suit u the best lar~@@@@!@!@!!@@@Originally posted by nismoS132:simi si pgm, i only know ec80, i dunno pgm ^^
-
PGM 4 got 2 type leh SE & SP if u toking abt SP model u mod the bike sure can win rvf for a distance but long distance RVF will overtake you loh. But SP Model hard to find liao. But PGM4 corner better than rvf. So PGM4 better rvf almost similar to NSR150Sp liao, on the road getting more nowadays.
-
wats the diff between the se n the sp version huh?which 1 more ex?
-
The Sp model is much more ex. The out look is almost the same. Wat i noe is Sp is sport production it's lighter thean SE so like wise conering is much better than SE and also depend on rider. Sp model very rare in Singapore mostly u c on the road mayb SE model. The price for Sp can reach till 12k to 16k if i'm nt wrong coz i heard from my mech friend say mah motor or dunno which motor shop selling 2nd hand so EX!!!! Ya also the front fork dunno which part also different... Pai sia 4get liao.
-
hey SP version and SE virsion only diff is the front adjustable fork and the megtak wheels which is 1 kg lighter only.and the price of is two is only diff by 1k like that
-
erm if any of u are interested in buying pgm u can go to tis thread to c..
www.sgforums.com/?action=thread_display&thread_id=25332 -
Originally posted by White^7:The Sp model is much more ex. The out look is almost the same. Wat i noe is Sp is sport production it's lighter thean SE so like wise conering is much better than SE and also depend on rider. Sp model very rare in Singapore mostly u c on the road mayb SE model. The price for Sp can reach till 12k to 16k if i'm nt wrong coz i heard from my mech friend say mah motor or dunno which motor shop selling 2nd hand so EX!!!! Ya also the front fork dunno which part also different... Pai sia 4get liao. Wah! This smart ass is so PRO..... Like what u've said, lighter bike corner better than heavier bike
Take bicycle go PG lor..... SE Standard edition..... The latest SP pgm comfirm cost less than 12k If cost 16K hor i rather take R6 lah..... If want to blow cow, do some homework first mah..... -
Hey ass hole wat blow cow! but i didn't said lighter bike corner better i said depends on rider, u noe hw to read anot? 16k is wat i hear from the motor shop mech said 1 damn u dunno u noe how to read anot i say mech say 1 not me! I juz say wat the mech told me from Loois motor. If u nt happy with wat i say u can dun interfer. No one here is PRO either u! So mind wat u say. Act like u r a real racer, I think u r more like a poser. Dunno hw to read go and study more.LISTEN UP nt bcoz i scare I dun want to offend any1 here.